Filed Under:
One of the questions we get most is, “Why did my soap turn brown?”If you’ve made a few batches of soap, you’ve likely encountered discoloration.This post talks about what causes the color changeand how to work with it in soap.
What causes discoloration
It’s often caused by vanilla, which is a flavor derived from orchids. Vanilla pods start out very green and then darken to brown astheyage and ripen. The darkening is caused by various reactions in some of the components. One of those is vanillin, which is the organic compound that gives vanilla its flavor.
Vanillin discoloration is a 100% natural process. Depending on the percentage in the fragrance, the soap candiscoloranywhere from off-white to dark brown. Itusually takes a few days to appear, although certain scents may not discolor for a few weeks.It shows up first on the part of soap that’s exposed to air. That means the sides discolor, but once you cut into the bars the middle is still white. Eventually, the whole bar will darken.
The soap aboveis scented withVanilla Sandalwood Fragrance Oil, which discolors dark brown. It’s1day old and the discoloration hasn’t fully developed. The tan color will continue to darken over time. You can also see that the soap went through partial gel phase in the center, and the discoloration developed faster there.
Aboveis the same batch after 3 days. The brown barsare from the first photo –they have been fully exposed toair and the vanilla discoloration has made its way through the bar. The soap in the center is freshly cut, which is why the center is still a creamy color. After a few hours, the discoloration willdevelopin the center as well.
Other aroma chemicals may cause discoloration as well. We include performance notes and finished photos of the fragrances in soap, so make sure to read those before use.
How to prevent or work with discoloration
If you’re making melt and pour soap,you can useVanilla Color Stabilizerto prevent discoloration. We recommend a 1:1 ratio with the fragrance.
We don’t recommend vanilla color stabilizerfor cold process soap because the results are inconsistent. It may not prevent the discoloration at all, or it may only work for a few months.
If the fragrance has a low vanilla content, you can use titanium dioxide. It lightens tan or light brown discoloration. Start by mixing 2 teaspoons of titanium dioxide into 2 tablespoons of a lightweight oil. At trace, add 1 dispersed teaspoon at a time. It’s tricky to know exactly how much to use because the soap hasn’t discolored yet. Just keep adding color until the soap is pretty light. We used titanium dioxide in thisCreamy Goat Milk Soap,which is made with Oatmeal Milk and Honey Fragrance Oil.
With a lot of titanium dioxide, you can getglycerin rivers. We recommend a5-10% water discountto prevent those.It also helps to keep the temperatures around 115-120°F and store the soap in a cool place.
If the fragrance has a higher vanilla content, the titanium dioxide can only lighten it so much. In that case, we recommend embracing the discoloration andworkingit into your design. You canscentsome ofthe soap so only one partdiscolors,like we did in the Cinnamon Cocoa Soap. You can alsoscentthe whole batch.
These tutorials show you how to work with discoloring fragrances.
- Goat Milk and Oatmeal Soap
- Dragon’s Breath Soap
- Espresso Shot Soap
- Chocolate Peppermint Soap Cupcakes
- Eggnog Soap
- Coffee Soap
- Pumpkin Souffle Soap
- Pumpkin Pie Soap
- Blueberry Soap
- Blueberry Thyme Soap
- Moonstone Soap
Vanilla content chart
The following chart includes all the Bramble Berry fragrances that discolor. If a scent has 0% vanilla, it won’t be on this list.
This post was updated inOctober 2018.
